Việc làm cho sinh viên Đại học Xây dựng miền Tây

- Kiểm soát đơn đặt hàng, dữ liệu đơn hàng- Quản lý tình trạng sản xuất, tiến độ và điều chỉnh kế hoạch sản xuất- Lập kế hoạch và báo cáo tình hình sản xuất hàng tuần, hàng tháng…- Cân bằng sản xuất line và giảm thời gian máy dừng.- Phối hợp với các bộ phận liên quan để giải quyết các vấn đề về điều chỉnh sản xuất, đơn hàng.

Production and Technical:• Oversee machines/equipment and ensure optimal functionality.• Work closely with engineers and technicians to maintain and improve production efficiency.• Perform maintenance and troubleshooting (cause analysis, countermeasure plan-ning, and execution) for all machines, including utility/facility equipment.• Install and launch increased production equipment (if have)• Support Sr. Production Engineer to bring idea for machine efficiency improvement• 6S implementation in factoryOperations• Support Production Manager for daily operation: quality check, batch control, daily report.• Implement OOE project to reduce MUDA or improve working efficiency• Continuous improvement in quality and service delivered to the customers• Alignment with HSE policies and 5S on the production shop floor• Other tasks be assigned by Production Manager

To deliver the shift/line objectives by empowering and engage people to develop their capability and ways of working through NCE implementation. Ensure line (shift) production plan is fully achieved on time and in compliance with internal and external requirements meeting safety, quality, cost, delivery and environmental needs (strive towards Manufacturing Excellence). - Ensure the identified development plan and assure the competencies of his/her team (incl. Temporary people) as per the agreed plan with Production Manager (proper training inc. equipment, safety procedures, hygiene). - Coach employees to fulfill and exceed the requirements of the job through NCE approach. - Ensure the timely deployment of People development plan and assure the competencies of his/her team as per the agreed plan with PM (proper training inc. equipment, safety procedures, hygiene). Enforce strict compliance to standard operating procedures (SOPs) by all personnel within the shift. - Manage Production effectively through operational reviews and use Standard Routines (SDCA) to ensure sustainable results. Use of Basic Problem Solving tools and knowledge sharing (OPLs) to drive continuous improvements. - Provides appropriate solutions, actions or corrective actions when deviation found in operations. - Analyses and addresses the equipment breakdown or machines stoppages. Co-ordinates with the the Engineering team to solve the problems. - Optimize the operations, processes and equipment to achieve the best line efficiency and performance, minimize the manufacturing losses. Involve in the design of the lay-out and equipment when necessary. - Strongly involves in continuous improvement and problem solving activities. - Controls the cost of production by managing and controlling the materials usage (Yield and Losses), manpower, machine utilization, M&R activities and etc. - Checks and correctly reports the production outputs, work in processes and materials usage by daily basis. Takes appropriate actions if needed. - Supports other departments (AG, QA, Engineer and etc.) for production related activities such as safety audit, manufacturing trials for new product development, quality audit, energy saving projects, investigate the root cause of consumer complaints and etc, - Ensure constant dialogue with relevant stakeholders (line shift teams, Production Manager, Maintenance, Unions, functional representatives on the line)./p

Evaluate adequacy of quality assurance standards- Devise sampling procedures and directions for recording and reporting quality data- Review the implementation and efficiency of quality and inspection systemsPlan, conduct and monitor testing and inspection of materials and parts to ensure finished product quality- Suppliers quality system audit & evaluation- Research NG parts from post process, define & monitoring improvement- Develop, recommend and monitor corrective and preventive actions- Evaluate audit findings and implement appropriate corrective actions- Monitor risk management activities- Document internal audits and other quality assurance activities.

- Xây dựng và thực hiện kế hoạch kinh doanh bán hàng toàn quốc. - Xây dựng và thực hiện kế hoạch tiếp thị, quảng bá thương hiệu, sản phẩm. - Lập kế hoạch, triển khai, kiểm soát ngân sách cho bộ phân phụ trách - Quản lý đội ngũ nhân viên bán hàng để đạt doanh số theo yêu cầu của Công ty - Xây dựng và triển khai các hoạt động hỗ trợ, chăm sóc khách hàng - Tham gia đào tạo huấn luyện đội ngũ nhân viên bán hàng

- Driving the capacity of production lines to ensure best optimization which meets Demand requirements and Plant performance- Build up the monthly Production Master Schedule (PMS) in PID wise based on latest MPS, DRP + Forecast and manage it within allowed deviation against quarterly PMS- Schedule and deploy raw materials supply plan to cover production demand and maintain inventory within target level- Control the raw material ordering and receiving within allowed deviation against the forecast- Determine the movement of FG inventory (ABC analysis) to ensure production plan of each item is in line with quarterly PMS and target inventory levels- Calculate and confirm the deviation factors of compound consumptions for each quarter- Calculate and confirm suitable material available date for each item in the order book to satisfy business need and customer’s request- Evaluating material supply plan and weekly demand to identify gaps in service as to develop suitable weekly production plan- Converting into daily production schedule based on the best balance between Production Plan and Customer Orders to ensure customer satisfaction and plant efficiency- Monitor production orders status, review production performance to ensure timely delivery, flagging any backlog quantity, work out the root cause, solve problem quickly- Regularly interaction with Production team to assist production output adherence to plan- Driving on weekly meeting with other functions regarding to the production issues/technical issues/quality issues,…- Responsible for mold/core changing schedule, co-ordinate with Production and Engineering in saving change-over- Constant interaction with Engineering team regarding to equipment status for output controlling

Purpose of Position: Support in managing technical requests and verifying compliance of IRCA products across all target markets (EU/APAC). She/he will be responsible to ensure that the company strictly follows government rules and regulations, with extensive interaction with regional and national regulatory agencies. The specialist is expected to keep his company updated on regulatory policy and procedural changes. Description of Main Activities/Responsibilities:- Assess and verify raw materials used in IRCA products including supplier updates that may impact IRCA products to meet Food Regulations across EU and APAC. - Responsible for label template creations for commercialized products and ensure labels are in compliance across all target markets (EU/APAC). - Maintain regulatory data readiness and integrity in IRCA systems. - Work closely with category technologist and supply quality on existing and potential suppliers and provide regulatory inputs related to specific raw material category. - Keep abreast with regulatory updates that will impact our products and communicate to stakeholder to ensure existing products are in compliance with the new regulation. - Able to write, concise but detailed and easy to understand regulatory horizon scanning and regulatory strategies that could support business growth.

- Bảo dưỡng, sửa chữa phương tiện của Khách hàng theo mảng công việc được phân công theo lệnh sửa chữa (Đồng Sơn/Sửa chữa chung).- Bảo dưỡng, sửa chữa phương tiện của Khách hàng, BDSC xe buýt và trang thiết bị công nghệ xe buýt theo đúng tiêu chuẩn của hãng sản xuất VinFast hoặc theo Quy định của Công ty.- Thay thế vật tư phương tiện, tuân thủ đúng quy trình quy định, đảm bảo chất lượng và tiến độ theo yêu cầu.- Tham gia giải quyết các vấn đề phát sinh trên tuyến đối với xe buýt, sửa chữa lưu động, cứu hộ xe của Khách hàng theo quy trình cứu hộ MBC.- Quản lý, sử dụng trang thiết bị, dụng cụ Xưởng BDSC đúng hướng dẫn kỹ thuật, tuân thủ quy định về an toàn lao động và PCCN.- Thực hiện ngiêm chỉnh chương trình 5S, giữ gìn khu vực làm việc sạch sẽ- Thực hiện các nhiệm vụ khác theo phân công của cấp trên.

• Update Factory allocation, PRD (package ready date), PCD (plan cutting date) on the TNA for Sales and Fabric Merchandiser in Shanghai. • Check and translate PP comments into Vietnamese before sending Factories. • Arrange approved swatch fabric and trims to send factory as a standard of Fabric/ trim inspection. • Guide factory about thread instruction based on swatch fabric and be responsible for the color approval of thread options. • Make a material balance sheet to monitor the situation and work with Fabric merchandiser and Purchase merchandiser in terms quantity and date of arrival • Follow up the FPP sample with factory to ensure PRD dates are met. • Handover PP meeting details to QC team to conduct PP meeting with outsource factory in physical. • Make the sample planning (Press sample, TOP sample, Shipment sample, E-com sample etc.) and arrange to send samples to Buyer on time with the best quality. • Check all the samples along with office QA and sign on the register/report. • Consult senior manager for commercial decision of sending samples if there is a delay • Check Factory production plan to see factory’s plan same as OCC. • Check Factory’s Fabric/Trims inspection report after our QC confirmation. • Collect proof of defects and roll shortage along with QC. • Once buyer approves, send request to factory for over cutting and to Purchase merchandiser for arrange extra trims within factory requirement date. • Check factory daily progress reports (cutting, input, output, end line QC, final QC, packing) and chase factory to catch plan Final inspection date and Buyer delivery date. • Send delivery extension request to Sales and follow up. • Follow production status closely and coordinate with other departments (Sales, Purchase, Fabric merchandiser, Technical team, QC team, Logistic team, factory ...) to handle all raise issues during production and delivery. • Complete Buyer QC file (documents + seal sample) to send factory for 3rd party Inspection. • Book Inline inspection and Final inspection with 3rd party. • Inform QC CWT about the 3rd party Final inspection plan and ensure QC CWT conduct Pre-final inspection internally before having official inspection. • Check Final packing list of factories and make Carton barcode sticker on Buyer’s system. • Balance materials at the end of the order based on actual cutting qty, actual shipping qty and request factory to return excess materials. • Check and sign the final balance sheet from the factory and submit it for Senior Manager signature. • Collect the final balance sheet from Sourcing assistant to send back to the factory to apply payment. • Make reconciliation report within 2 weeks of shipment and send to purchase merchandiser to input purchase details • Investigate on Buyer claims if any

1. Setting specification of manufacturing facility and equipment. 2. Planning and implementing improvement activities for production processes. 3. Designing, determining, coordinating, and controlling production processes (Stamping, die-casting, assembly) to be able to ensure good quality. 4. Collecting information and taking actions to comply with the regulations related to production. 5. Managing and controlling the design information (New or change design), feed back to headquater designing department any design problems.

Job Title: CNC LeaderDepartment: Production EngineeringReport to: Lead engineer or Manager EngineerABOUT THE POSITION: Đây là mắt xích quan trọng đảm bảo cho dây chuyển sản xuất trôi chảy trong toàn bộ quá trình sản xuất trong nhà máy. Với tư cách là kĩ thuật CNC, vị trí này sẽ đưa ra các phân tích và giải pháp nhanh và chính xác các vấn đề về việccải tiến máy CNC, các vấn đề về gia công cơ khí. Phối hợp với các bộ phận trong nhà máy như sản xuất, chất lượng, mua hàng … với mục tiêu nâng cao năng suất chất lượng của các dòng sản phẩm. Essential functions and key responsibilities are:● Phân tích lỗi phát sinh trong quá trình gia công CNC (nguyên liệu đầu vào, máy móc, đồ gá kẹp, dao cụ, phương pháp gia công… ● Quản lý chương trình gia công● Lập trình gia công● Thực hiện các công việc do cấp trên giao.

1. Công việc tại hiện trường• Các công việc liên quan đến việc bảo trì và bảo dưỡng hệ thống máy nén khí công nghiệp;• Thực hiện kiểm tra và bảo dưỡng thiết bị theo định kỳ cho khách hàng tại nhà máy• Lập tiến độ thi công, kiểm soát tiến độ.• Giám sát việc thực hiện các quy định an toàn, quy định làm việc tại nhà máy của đội kỹ thuật và thầu phụ• Kiểm soát công việc của nhà thầu phụ đảm bảo tiến độ, chất lượng dự án.• Kiểm soát việc thi công đảm bảo theo đúng các yêu cầu và tiêu chuẩn kỹ thuật.• Đưa ra giải pháp xử lý các phát sinh về thi công.2. Chuẩn bị giấy tờ, dụng cụ và làm báo cáo• Chuẩn bị hồ sơ, giấy phép và các thủ tục liên quan đến an toàn trước khi làm việc cho đội kỹ thuật• Làm các báo cáo về tình trạng thiết bị, báo cáo hoàn thành công việc theo yêu cầu của khách hàng• Chuẩn bị vật tư, công cụ dụng cụ cần thiết trước khi vào làm việc• Lập danh sách hệ thống máy nén khí tại nhà máy của khách hàng• Quản lý dụng cụ, thiết bị phục vụ cho việc sửa chữa• Các công việc khác liên quan khi có yêu cầu

Department InformationThe EDA department specializes in Advanced Driver Assistance System (ADAS), in advanced products such as radar, front/rear/surround video, and ultrasonic sensors, supporting software & system development and project management roles. Utilizing cutting-edge technologies like ADAS Level 2++, Sensor Fusion, and AI, the team serves global clients including Japan, China, Europe, and Vietnam, with a strong focus on security, safety, and smart mobility solutions.Your Main Responsibilities• Design and implement advanced driver assistance system (ADAS) functionalities.• Contribute to the architectural design and perform technical analysis of the system.• Collaborate with customers to define and refine system specifications.• Take a leadership role in function development, empowering other developers to leverage your framework.• Analyze real-world vehicle scenarios and contribute innovative solutions to resolve complex challenges.What You'll Gain by Joining Us• Innovative Products: gain a comprehensive understanding of system architecture• Onsite Opportunities: Participate in vehicle tests with OEMs and Bosch counterparts, gaining valuable insights into use cases and user experience.• Global Collaboration: Work with teams from diverse cultures, including Europe (Germany, Hungary), Japan, China, and India.• Client Interaction: Directly engage with COEM and JOEM clients to build strong relationships.

To ensure the efficient and effective operation, maintenance, and repair of CLAAS Machines by providing high-quality technical support, consultation, and training to dealers and customers. This position aims to enhance customer satisfaction and optimize machine performance in Vietnam & Laos Market.• Supporting dealer service engineers (if planned) and end customers in the repair, assembly and commissioning of Claas machines. • Conducting induction training for the end customer's operating staff. Participate in the commissioning of the machine in the field/farm.• Checking the function of all components and assemblies, if necessary carrying out repairs to restore functionality, adjusting machines and assemblies.• Consulting the end customer on maintenance and operation of the machine. • Supporting customers in operating the machines during technological operations • Training dealers and end customers on Claas machines as a trainer • Technical support to key customers.• Supporting marketing campaigns and logistic processes (receiving, unloading and loading of machines).• Researching breakdown and damage statistics.• Communicating with the Claas support team and component suppliers.• Defining and monitoring general warranty periods.• Supporting and carrying out SI's (service inspections).• Investigation of technical problems in the field, if required, in order to resolve them promptly.• Collecting, processing and analyzing information on identified faults of machinery according to approved parameters and forwarding it to Claas for processing.• Parts support, determining the catalogue number or technical parameters of spare parts, the correspondence of these spare parts to the machine serial number and their use on a specific type of machine.

* Job description- Be responsible for the safety in the Company- Ensure compliance with local and international health, safety and environmental. Keep up-to-date with regulations and implement necessary changes- Conduct workplace risk assessments, safety audits, and investigationsof incidents or neer-missing. Recommend corrective and preventative actions- Develop and conduct HS training programs of employees. Promote a culture of safety responsibility.- Other tasks as assigned by the Manager

Job Overview and Core Responsibilities:• Identify, locate, count and generating quote on all Air Devices including Grilles, Registers,Diffusers, Dampers, Louvers, Fire dampers, etc. found on mechanical plans.• Apply competitive cross reference, pricing, and lead time strategy on quote generation.• Ensure compliance of selections with industry standards and regulations• Providing technical guidance on GRD Selection to sales team, customers and other teammembers• Maintain and organize team inbox for workflow management• Maintains accurate, complete, and timely information on productivity, capacity, and resourceutilization.• Overcomes business and technical objections of prospective customers.• Lead the execution of processes and programs to enhance customer experience and increasequote conversions.• Collaborate with other departments to handle sales, marketing, inquiries, and deliveriesefficiently.• Identify growth opportunities and market trends.• Performs other duties as assigned.

THÔNG TIN TỔNG QUÁT - Báo cáo cho: Trưởng nhóm - Tuổi: 22-27 - Quy mô nhóm: 10 - Yêu cầu kinh nghiệm: Ưu tiên ứng viên đã có kinh nghiệm trong lĩnh vực bảo trì cơ sở hạ tầng nhà xưởng trong công ty Nhật. - Học vấn: Tốt nghiệp Cao đẳng hoặc Đại học – chuyên ngành Điện, Điện tử, Điện lạnh, Cơ khí- Giới tính: Nam- Địa điểm: Hưng Yên.- Ca làm việc: Ca ngày/Ca đêm MÔ TẢ CÔNG VIỆC1. Vận hành, bảo trì cơ sở, sửa chữa, xử lý sự cố các hệ thống phụ trợ của nhà máy như:- Điện, khí nén, nước cấp, cấp khí LPG, N2, O2, cấp môi chất lạnh R32.- Hệ thống phòng cháy – chữa cháy, điều hòa thông gió, nước thải, cơ sở hạ tầng.- Thiết bị sản xuất: Xe nâng hàng, thang máy, cầu trục, cầu công.2. Quản lý kho vật tư, hệ thống ISO3. Công việc khác.- Tham gia thực hiện các công việc như lắp đặt, sửa chữa thiết bị do bộ phận khác yêu cầu

- Establish the manufacturing process for leading composite material in the aviation field.- Prepare the work instruction to the serial product incorporated from drawing requirement and process verification trail. - Consideration of the countermeasure for non-conformity.- Process improvement and maintenance for serial production.- Communication/Discussion with overseas customer and engineer in Japan.