Việc làm cho sinh viên Đại học Công nghiệp Quảng Ninh

1. Hệ thống quản lý chất lượng:• Thiết lập, chuẩn hóa và vận hành hệ thống quản lý chất lượng Nhãn hàng riêng: trước, trong và sau Sản xuất (Theo tiêu chuẩn Quốc tế/Việt Nam)• Xây dựng tiêu chí, quy trình đánh giá và phân loại NCC.• Xây dựng kế hoạch kiểm tra định kỳ, kiểm tra đột xuất tại NCC• Đảm bảo sản phẩm an toàn - đạt chuẩn - ổn định - nguồn gốc minh bạch trước khi tung ra thị trường2. Quản lý rủi ro:• Thiết lập hệ thống Quản lý rủi ro cho toàn bộ hoạt động liên quan đến ngành hàng Nhãn hàng riêng: Sản xuất, Vận chuyển, Lưu kho, Bán hàng.• Nhận diện, đánh giá và phân loại theo nhóm rủi ro trọng yếu.• Báo cáo và đề xuất lên Giám đốc khối các biện pháp kiểm soát rủi ro.• Thu thập, cập nhật và hỗ trợ dữ liệu cho Hệ thống cảnh báo sớm sai phạm/gian lận trong hệ thống liên quan đến chất lượng sản phẩm và NCC• Xây dựng cơ sở dữ liệu thông tin kiểm soát về các nhân sự quản lý và các vị trí nhạy cảm trong hệ thống.3. Xử lý sự cố• Chủ trì xử lý các sự cố liên quan đến chất lượng và an toàn thực phẩm• Tổ chức điều tra nguyên nhân gốc rễ và phối hợp với các bộ phận liên quan triển khai đề xuất hành động ngăn chặn sự cố tái diễn• Đảm bảo kiểm soát thông tin sự cố và truyền thông đúng quy định, không làm ảnh hưởng đến uy tín thương hiệu WCM

• Install, set up machine, jig, tools; create standard documents and train production line leaders to ensure products are manufactured according to drawing requirements & meet quality and performance target.• Control line stoppages, quality, create standard documents & perform machine maintenance. Analysis PFMEA to prevent machine issues & quality problems on the line, ensuring (Quality, Cost, Delivery) targets are achieved.• Investigate quality problem, line stoppages & collaborate with other departments to issue actions &countermeasures to prevent recurrence of problems.• Understand and analyze production line performance as Cycle time, OEE, TVP, VSM, Cost and take actions such as designing new jigs, equipment, and machine for special using to improve production line to achieve highest performance, minimize defects, labor, cost, energy consumption, and ensure production safety.• Perform other tasks as assigned by supervisors or managements request.

Purpose of Role:• FDM Supervisor owns the process related to materials (ingredients-packaging) and finish product BOM, (Bills of Materials) finalization. • Owns the Product Data Repository (PDR) system and makes sure product formulation is built as per PVM global guidelines (naming convention and structure)• Responsible for maintaining up to date product BOMs in PDR and SAP system• Oversee the product formulas costing by closely working with finance controlling team and drives product formulas cost reduction, harmonization and standardization to improve company profitability and operational complexity reduction • It is the point of contact with material suppliers to gather technical information requested by regulatory and QA team to ensure country compliance and to sustain marketing claims • Work closely with the Research and Development (R&D) team to finalize new product development recipes or modifications to existing recipes Key Accountabilities/ Job Description: 1. Recipe Oversight:a. Supervise the procedures, timing, and issuance of edible, packaging, and ingredient BOMs b. Ensure that BOMs are generated and maintained efficiently, meeting the required standards and deadlines.2. Recipe Logic Management:a. Oversee the logic used to process edible, ensuring accuracy and adherence to established processes.b. Generate recipes of edible part in PDR for new products or modification of existing recipes according to what we are doing on the production floor: BOM adjustment, Scrap Factors, Stickiness Factors.c. Ensure any revision in logic and naming or any guidelines from Group levels are communicated to all users and implemented.d. Share the updated status of the compliance level of PDR recipe logic to Group R&D.3. Recipe and Raw Material Review:a. Ensure a continuous and thorough review process for recipes and the management of raw material documents.b. Guarantee data accuracy and compliance with relevant standards and regulations.4. Team Management:a. Manage and supervise all activities conducted by the Product & Technology (P&T) Data Management Team in Vietnam.b. Provide leadership, guidance, and support to team members to achieve department goals.5. Product Data Repository (PDR) System Management:a. Oversee the management of the Product Data Repository (PDR) system at the raw materials, edible, and packaging levels in Vietnam.b. Ensure the PDR system's effectiveness and data integrity.6. Recipe and Raw Material Review:a. Receive, verify, and maintain accurate records of edible recipes within the designated systems (Excel files to SharePoint/SAP/PDR)b. Consolidate usage level of ingredients in existing recipes in support for further evaluation/study at Group level in term of material compliance.c. Involve in managing the change of current recipes include materials, quantity, and formulas by providing assessment for Ingredient list and product claim impact. Working with cross functional teams including Regulatory and QA for further assessment if needed.d. Together with R&D managers, Senior RM Specialist provides insights about BOM quantity of edible part for monthly review of efficiency and saving calculations.7. Formula Costing:a. Along with finance controlling team consolidate and maps the BOM costing, including material consumption, and standard material losses b. Participate to the monthly efficiency variance operational meeting to identify the gaps and purpose continuous improvement activities c. Work with the operation team to map the year on year standard cost reduction strategy to improve company profitability d. Prepare RM BOMs to reflect any necessary changes for annual Budget.8. Ensure recipe compliance:a. Ensure to check RM compliance through confirmation from suppliers and proceed preliminary additive limitation assessment following global regulatory direction b. During the development of a new recipe, together with R&D team do the preliminary analysis for the maximum limits of additives and country conformity.c. Proactively embracing the updated regulatory requirement by evaluating the impact on current recipes and driving for the compliance of new regulation implementations.9. Documentation and Certifications:a. Collect technological information from R&D and relevant teams (QA, P&D), Suppliers to prepare technical documents for logistics, product registrations.b. Provide to Regulatory with necessary technical information (BOM, CoC, Products technical datasheets, RM Compliance) for product labeling and risk assessment in case of extend exporting markets, renew product labels, registration.c. In case of any recipe updates, ensure the information is communicated to markets through NPD team and continue to provide updated technical documents.

Department/Section: PM - Program ManagementReport to: Program ManagerJob Purpose Summary Coordinate and expedites the flow of work & materials within or between departments to daily and weekly production schedules. Duties include reviewing and distributing production capacity, workload and shipment schedules. Confer with department supervisors to determine progress of work and completion date. Reviewing inventory levels and help to solve production issues / problemsKey Responsibilities and - Responsible for production/material planning, scheduling and control. - Work closely with Product Engineer to launch new products for production build - Work closely with Procurement for timely materials availability to support NPI production build plans. - Liaise with Production and Engineering on capacity/resource planning to ensure production plans are met with optimal utilization of capacity. - Ensure daily production requirements are achieved to meet customer demands / expectations - Analyze and prepare documents needed for production- Data analysis and decision making to support raw material supply and finish goods demand - Creates production schedule and prioritize work orders for production optimization- Maintains the production schedule and other reports as required - Follow up as required with all teams to expedite flow of materials and documents to meet production schedules and customer expectations - Complete status reports for production progress, work in process and raw material inventory - Interacts with shop floor management on daily basis to resolve issues regarding production efficiencies or additional information as requestedOther Information- Normal Shift- Production line- May need to work overtimes or rotate with others for different shift as required

* JOB SUMMARY:The Planning staff for Nefab Bac Ninh factory will be overall in charge of the planning job for both Bac Ninh and Dong Nai factory which includes of all raw materials, consumable and finished goods, inhouse and main outsourcing-Not including oversee trading FG. This position will report to Senior planning leader* MAIN RESPONSIBILITIES:- Unify control of one focal point of production and delivery plans, - Receive information from CS. Deploy in detail weekly / daily basic for Inhouse north/ Inhouse South including Wood & Thermoforming & Extrusion & Corrugated & Samples. And for main local suppliers- Update the daily status of planning completion, proactively push relevant departments to complete the plan - Review forecast with CS, review weekly raw materials plans for in-house north and In-house South, build & control inventory for RM and FG based on forecast and lead time with min/max warning in color- Review weekly raw materials plan for main suppliers build & control inventory for RM and FG based on forecast and lead time with min/max warning in color- Review consumable materials plan for in-house North, in-house South - Monitor the progress of incoming materials PO to ensure the progress of incoming materials will match the Min/Max material inventory- Control and warn of slow-moving goods, warn of issues related to FIFO, JIT follow actions plan related to other departments.- Responsible for accuracy and deadline of data that put in the system. Pushing all related dept to complete accordingly.- Responsible for monthly inventory checking at all site (inhouse north / inhouse south / main suppliers). Inventory report must be available at 2nd working day of the month.- Responsible for running internal KPIs system.- Responsible for completion of weekly, monthly report (Whole factory) - Other tasks as assigned by manager.

Position Objective:• Under the direction of Segment Supplier Quality Section Manager• Follow Autoliv policies and procedures. • Ensure local Vietnam supplier development new components or project conforming to specification. Position ScopeUnder the direction of Plant Supplier Quality Manager, the Process Engineer will take necessary steps with Autoliv policies and procedures, to ensure adequate quality of parts/materials are available to meet inspection and testing component part based on drawing specification. Tasks/ Responsibilities: (Main Activities)• Reference to Autoliv Quality Organization Role & Responsibilities global standard. As Project SQ role & main task (External Supplier).• Support assignment task as Segment Supplier Quality in local Vietnam supplier under supervise by Segment Supplier Quality Section Manager • Actively involved in new component sourcing and development process• Involved in the TFC and CTS process with Purchasing, Engineering and Suppliers.• Involved in CLD definition together with Project Buyer and Engineering.• Involved in contract review with Project Purchasing.• Owner of SQP (APQP)• Define the SQP tasks with the suppliers.• Follow up completion of SQP tasks in terms of timing and quality for defined deliverables.• Participate in supplier production trial runs and Run at Rate per CLD.• Perform audits and PFMEA go and see as applicable for new projects.• Responsibilty to create ALISQI (eDAR) and implementation of ALVS412 • Owner of the PPAP approval. (Ref. AS007, AS404 and AS100)• Escalate SQP delays / deviations according to AS404• Actively connected with APDS project teams with Project Purchasing and AS007 project teams with Serial Purchasing.• Involved in Pre-APDS projects through Purchasing.• Owner of SQP / PPAP for serial changes and replacement tools ensuring one PPAP is valid for all Autoliv plants.• Support other divisions in terms of supplier onsite project activities when requested.• AS051 rating for SQP and RESP performance.• Involved with NCMs for new project.• Keep SQP information updated on Visual board and PLM system.Key Challenges • Reference Key Challenges & AAS SQ KPI Tactics were deploy from Global Policy Deployment• Lead external suppliers towarde zero defect.• Deliver Quality assured components according to project time schedule.• Monitoring component quality problem and supplier improvement.Key Relationships(Internal & External) • Collaborate with Project Buyer , Design Authority and Project Team Leader• Coaching and coordinate skill, ability to lead/supervise external suppliers • Good coordination / Good follow up to check effective counter measure.• AS 100 project members• AS 007 Project Members.• Suppliers and Customers..

- Phát triển mẫu mới và kiểm tra tin cậy trước khi bán sơn cho khách

• Make & adjust BOM for new model• New model development by 2D, 3D drawing• Develop mechanical components for refrigerator• Building production process and making working guide• Improving line productivity, reduce production loss• Test function of product• Optimize manufacturing cost

POSITION SNAPSHOT• Location: Biên Hòa, Đồng Nai• Company: Nestlé Viet Nam• Full timePOSITION SUMMARY You will plan new product development projects to be launched on time, with effective cost with no major qualify issues and in compliance with Nestle and local regulations as well as improve existing products. A DAY IN THE LIFE … • Trial for validation of new packaging and changes in specifications. • Support shelf-life, storage handling, laboratory and transport tests for validation of new packaging. • Conduct value analysis; identify and recommend cost reduction and source optimization opportunities. • Support Corporate Packaging and Procurement in the selection, assessment and development of new suppliers/converters. • Ensure development of competencies of packaging lab analyst or supplier & disseminate packaging best practices and knowledge at the shop floor.

• Nghiên cứu phương pháp may khi có hình ảnh từ tài liệu và các vòng may mẫu .• Đưa ra rủi ro, nguy cơ tiềm ẩn của đơn hàng và biện pháp phòng tránh trong sản xuất .• Thực hiện test cấu trúc may khó , sử dụng ke , gá , cữ , máy móc tự động .• Kiểm tra quy trình may sản phẩm (OB) trước khi đưa xuống sản xuất .• Xử lý , tháo gỡ những vấn đề phát sinh xảy ra trong quá trình sản xuất .

Tháng 12/2025, Canon Việt Nam đang tuyển dụng nhân viên tốt nghiệp Đại học, Cao đẳng chuyên ngành Điện, Điện tử; Cơ khí; Cơ điện tử, Chế tạo máy; Tự động hóa;…và các chuyên ngành liên quan khácChấp nhận ứng viên mới ra trường, chưa có kinh nghiệm làm việc.Kế hoạch thi tuyển:- Thi viết: 17/12/2025 & 18/12/2025- Phỏng vấn vòng 1: 25/12/2025 & 26/12/2025- Phỏng vấn vòng 2: 08/01/2026 & 09/01/2026- Lịch đi làm dự kiến: 13/01/2026

Thông tin công tyCông ty Cổ phần Giải pháp Tự động hóa ETEK là doanh nghiệp tiên phong trong lĩnh vực sản xuất cung cấp thiết bị tự động hóa, dây chuyền sản xuất, thiết bị đào tạo, thiết bị dân sinh (máy bán hàng tự động), hệ thống đỗ xe tự động hàng đầu Việt Nam. Với mục tiêu mang đến cho khách hàng những sản phẩm và dịch vụ chất lượng cao, ETEK không ngừng nỗ lực nghiên cứu và ứng dụng các công nghệ tiên tiến vào các dự án tự động hóa. Đội ngũ của ETEK bao gồm những chuyên gia giàu kinh nghiệm và tâm huyết, cùng các kỹ sư trẻ trung, sáng tạo, luôn sẵn sàng đối mặt với những thách thức và hoàn thành các dự án theo chuẩn quốc tế.ETEK đang tìm kiếm các ứng viên tài năng và nhiệt huyết cho vị trí Kỹ sư lập trình PLC để cùng đồng hành và phát triển với Etek, mang lại giá trị vượt trội cho khách hàng và xã hội.1. MÔ TẢ CÔNG VIỆC- Thiết kế, lập trình và triển khai hệ thống điều khiển PLC, HMI cho các dây chuyền và thiết bị tự động hóa tại công trường (ưu tiên dòng PLC, HMI Siemens).- Phân tích yêu cầu kỹ thuật của dự án, xây dựng giải pháp điều khiển phù hợp.- Lập trình, kiểm tra và chạy thử hệ thống tại xưởng và tại công trình.- Tích hợp và kết nối PLC với các thiết bị ngoại vi (sensor, actuator, biến tần, SCADA…).- Phối hợp với các bộ phận kỹ thuật cơ khí, điện để đảm bảo tiến độ và chất lượng dự án.- Hỗ trợ xử lý sự cố, vận hành hệ thống và bàn giao cho khách hàng.- Thực hiện các tài liệu kỹ thuật, hướng dẫn vận hành, và bàn giao cho khách hàng..

Position Objective: • Achieve all Process Engineering, Production’s specific target and Autoliv Vietnam generic targets (Profitability, Policy deployment…) for IE. Position Scope• Report to the Process Engineering Manager• Follow and promote all ALV Vietnam policies and procedures. Tasks/ Responsibilities:(Main Activities) • Install, operate, and optimize production lines according to technical procedures and standards.• Operate machinery and ensure smooth production processes.• Investigate product defects and implement corrective actions to prevent recurrence.• Coordinate with relevant departments to ensure stable operation, efficiency, and product quality.• Monitor, analyze, and troubleshoot technical issues during production.• Participate in process improvement initiatives to enhance productivity and reduce defects.• Train and guide operators on proper machine usage and safety procedures.• Prepare technical reports, operation logs, and propose technical solutions.

• Tư vấn các yêu cầu kỹ thuật và giải thích sự cố cho khách hàng• Thực hiện lắp đặt, sửa chữa, bảo dưỡng và bảo trì hệ thống điện lạnh• Lập báo cáo công việc, ghi chép nhật ký bảo trì và đề xuất cải tiến khi cần.• Các công việc khác được giao bởi quản lý trực tiếp

1. Prepare the SOR for the control system.2. Define PLC, HMI, SCADA, and network architecture requirements in accordance with VinFast standards.3. Ensure seamless integration of automation systems with equipment and higher-level systems such as MES.4. Configure and program PLCs (e.g., Siemens), HMIs, and industrial communication networks.5. Ensure compliance with industry standards and safety regulations (e.g., IEC, ISO, SIL).6. Support Body Shop control system discussions with line builders to ensure adherence to VinFast standards, including network and MES interface requirements.7. Prepare shop floor requirements for the GA and Body Shop.8. Review and approve line builder documentation to ensure alignment with project and control system standards.9. Coordinate and finalize LAN, power, and pneumatic drop layout requirements with line builders

I. JOB SUMMARY • Perform and coordination work related to maintenance, design, installation machinery, equipment, tank & piping, others steel structure, ensure keep safety, environment, quality and schedule in Bien Hoa FactoryII. MAIN RESPONSIBILITYPerform the following assigned tasks in cooperation with other colleagues or Contractor.Additional roles andresponsibilities may be assigned:1. Complete the following tasks according to the process, on schedule and with results: • Handle assigned job: receive, take action & control related to request from factory that appropriate with company & department regulation. • Make method, plans, estimate and submit budgets, design, assign person incharge, schedule work related to machine, equipment, tank & piping, others steel structure, base on the current status, technical-construction standards, and manufacturer's specifications. • Calculate, design piping system, pump, agitator & heat exchanger, others steel structure.2. Cooperate with other team members to complete assigned tasks: • Check construction method to warranty safety, environment not only whole construction time but also before and after finished. • Control material follow tender document, drawing & quotation. Control construction quality follow approval. • Control according to the approved construction schedule. • Running test, commissioning & hand over system to production site. • Storage as-built drawing.3. Understand and active follow up the Section target

• Thiết kế bản vẽ chi tiết 2D, 3D Autocad• Thực hiện báo giá, bóc tách khối lượng bản vẽ cơ điện• Kết hợp với bộ phận dự án, triển khai bản vẽ và giám sát thi công• Báo cáo tiến độ công việc theo yêu cầu của Ban giám đốc công ty

You’ll collaborate closely with design, sourcer, and suppliers to validate new product designs, assess materials, finishes and constructure, and confirm that every new product we develop meets our brand’s performance, reliability expectations and user satisfaction. You’ll play a key role in evaluating designs, verifying functionality, and driving improvements throughout the product development lifecycle. Additionally, you will handle general administrative and support tasks to ensure the smooth operation of the office.Key Responsibilities:• Collaborate with cross-functional teams to define product performance and reliability targets.• Review design outputs and test results to ensure alignment with functional requirements.• Identify potential risks or inconsistencies in early design stages and recommend corrective actions.• Support continuous improvement initiatives in product performance and development processes.• Handle other administrative tasks such as data entry, document management.• Assist the team with other assigned ad-hoc duties.Transportation: shuttle bus (provided) & motorbike (self-prepare)Salary: Negotiable