Việc làm cho sinh viên Đại học Công nghiệp Quảng Ninh

- Lắp đặt, chuyển giao công nghệ, hướng dẫn vận hành, bảo trì các loại thiết bị, máy móc gia công (Các loại máy tiện, phay..., máy vận hành thủ công hoặc NC, CNC...), các thiết bị đo lường...- Bảo hành, bảo trì, thay thế, sửa chữa các loại thiết bị, bộ phận, máy móc do công ty cung cấp- Công việc cụ thể cho mỗi vị trí sẽ được mô tả chi tiết trong quá trình phỏng vấn

Position Objective: • Promote Customer Specific requirements and compliances • Promote AS implementation. • Establish, maintain and continual improvement of Quality management system. • Auditing organizer for site certificates audit from external parties. • Ensure completed of all Management review input and output summary. • Leading to internal quality system and process audit. • MOSART mentor. • Summary of IATF public communication. Position Scope• Under the direction Plant Quality Manager and VP Quality, the Quality System Manager will take necessary steps with Autoliv policies and procedures, to establish and maintain the quality management system with support and corporate other external and internal management system in the organization. Tasks/ Responsibilities:(Main Activities) • Correcting the management review input, output and action plans. • Coordinates Management Review Activities/Action Plans • Lead/Coordinate the change effect to QMS standard • Organize the team to support CB audit. • Lead/participate problem solution with teams regarding audit findings. • Provide quality system, manufacturing process,product audits schedule and results to management review • Analyze audit results and direct audit priorities • Provides Management with results and recommendations • Provide support and training on QMS standards. • Ensure correct version to distributed (local and external standards) • Monthly summarizing & reporting the key change and implementation status of an AS to top management. • Review and Approve the documented procedures and department Wis • Develops common Management Manual and keep it updated • Supporting other system complinaces audit such as (BAM, CCAP, TISI , FMVSS and etc.) • General assignment required by Plant Quality Manager Key Challenges & Problem Solving • Ensure Management System complies to international standards. • Ensure the customer specific requirements are certified and maintained. • Ensure correct distribution, understanding and working act. to standards (Internal Operational Procedure, AS and Intenational standard). • Analysis audit result and direct audit priorities. Key Relationships(Internal & External) • Coordinate and administer third part audits.(CB, Government body and Customers) • Lead/coordinate and administer internal quality audit. • Coordination and follow up effectiveness of corrective/preventive actions from audit issued.

Position Objective:• Achieve all MC specific and VNQN generic targets (Profitability, Policy deployment and OPI) for MC.• Support new line launch and continuous improvement.• Produce all Prototype samples on timePosition Scope:• Continuous Improvements• Prototype activity• Support the APDS process and continuous process improvements• Follow and promote all ALV/ VNQN policies and procedures• Support intra department activities.Tasks / Responsibilities: (Main Activities)• Responsible for achieving policy deployment targets.• Through continuous follow up ensure that policy deployment targets are achieved.• Responsible for reviewing all Prototype drawings.• Responsible for creating all Prototype samples.• Responsible for Line design – Headcount, Machine & Equipment requirement for RFQ’s• Responsible for creating Nests for RFQ’s.• Support APS implementation, active participation in APS workshop activity• Support the APDS process.• Responsible for process documentation preparation and revision (Flow chart, PFMEA, Control plan,work instruction, line calibration matrix)• Ensure new launch on time and within budget.• Responsible for process release and trial build• Responsible for new jig and fixture implementation• Support new line set up.• Maintain and implement methods, systems and routines as necessary

Are you a seasoned quality professional ready to take ownership of supplier performance across a dynamic and diverse region? We are looking for a Supplier Quality Engineer to join our Global Supply - Supplier Quality Management (GS - SQM) team and drive supplier excellence in Asia Pacific.In this role, you will collaborate closely with Procurement, Engineering, Project and Global teams to perform Delivery Supervision (inspection, expediting), lead supplier qualification, audits, and capability development. You will be at the forefront of ensuring technical compliance, mitigating risks, and enabling successful project deliveries. If you thrive in a multicultural environment and enjoy traveling to solve complex quality challenges at the source—this is your opportunity to make a strategic impact.To ensure supplier quality excellence by managing qualifications, performance, and development of assigned category(ies) suppliers. The Supplier Quality Engineer works closely with Procurement to embed quality into supplier selection, performing delivery supervision and project-based sourcing decisions, while proactively driving defect prevention, supplier capability building, and compliance with Valmet’s standards at the source.Key Responsibilities:- Collaborate with procurement during supplier selection and qualification, providing input on quality risks, capabilities, and technical compliance.- Lead supplier qualification processes, including audits, documentation reviews, and first article inspections, ensuring readiness for project deliveries.- Act as the primary supplier quality contact for assigned category(ies)/projects, managing supplier delivery performance.- Coordinate with Procurement to embed quality expectations in supplier agreements and onboarding processes.- Drive timely resolution of supplier quality issues through root cause analysis (RCA) and corrective/preventive actions (CAPA).- Conduct supplier visits, process audits, and Gemba walks to verify compliance and enable proactive risk mitigation and explore development opportunities.- Lead and track supplier claim management activities by initiating claims, validating cost of poor quality (COPQ), and supporting claim recovery with Procurement.- Support supplier coaching on quality tools and practices to foster self-inspection, problem-solving, and capability growth.- Contribute to supplier scorecards and performance reviews with data-driven insights for continuous improvement and escalation when needed.

Bạn có đang tìm kiếm một công việc nơi mà kỹ năng kỹ thuật được thử thách mỗi ngày, đồng thời mang lại cơ hội phát triển trong lĩnh vực điều hòa không khí & tự động hóa tòa nhà?Nếu câu trả lời là Có, đây chính là vị trí dành cho bạn!Vị trí này mang đến cho bạn cơ hội:• Tiếp cận khách hàng & dự án: Là cầu nối giữa công ty và các đối tác (tư vấn thiết kế, chủ đầu tư, nhà thầu) để tìm kiếm cơ hội dự án, mở rộng thị trường cho giải pháp điều hòa công nghiệp (AP) & dân dụng (UP).• Triển khai giải pháp thông minh: Tư vấn, thiết kế và lập trình các hệ thống điều khiển điều hòa, kết nối với smartphone, BMS và smart home.• Đồng hành cùng đối tác: Hỗ trợ triển khai, giám sát lắp đặt tại công trình, đảm bảo đúng tiến độ và chất lượng.• Quản trị dự án chuyên nghiệp: Thực hiện hợp đồng, SO/PO, hóa đơn và quản lý danh sách dự án cho Solution Business.• Hỗ trợ linh hoạt: Là thành viên chủ lực trong team, phối hợp để mang lại thành công cho các dự án.Tại sao bạn sẽ yêu thích công việc này?• Được tham gia vào các dự án công nghệ tầm cỡ trong lĩnh vực HVAC & Automation.• Cơ hội phát triển kỹ năng lập trình, thiết kế giải pháp tự động hóa tiên tiến.• Làm việc trong một môi trường năng động, cởi mở, nhiều thử thách và cơ hội thăng tiến.

To deliver the shift/line objectives by empowering and engage people to develop their capability and ways of working through NCE implementation. Ensure line (shift) production plan is fully achieved on time and in compliance with internal and external requirements meeting safety, quality, cost, delivery and environmental needs (strive towards Manufacturing Excellence). - Ensure the identified development plan and assure the competencies of his/her team (incl. Temporary people) as per the agreed plan with Production Manager (proper training inc. equipment, safety procedures, hygiene). - Coach employees to fulfill and exceed the requirements of the job through NCE approach. - Ensure the timely deployment of People development plan and assure the competencies of his/her team as per the agreed plan with PM (proper training inc. equipment, safety procedures, hygiene). Enforce strict compliance to standard operating procedures (SOPs) by all personnel within the shift. - Manage Production effectively through operational reviews and use Standard Routines (SDCA) to ensure sustainable results. Use of Basic Problem Solving tools and knowledge sharing (OPLs) to drive continuous improvements. - Provides appropriate solutions, actions or corrective actions when deviation found in operations. - Analyses and addresses the equipment breakdown or machines stoppages. Co-ordinates with the the Engineering team to solve the problems. - Optimize the operations, processes and equipment to achieve the best line efficiency and performance, minimize the manufacturing losses. Involve in the design of the lay-out and equipment when necessary. - Strongly involves in continuous improvement and problem solving activities. - Controls the cost of production by managing and controlling the materials usage (Yield and Losses), manpower, machine utilization, M&R activities and etc. - Checks and correctly reports the production outputs, work in processes and materials usage by daily basis. Takes appropriate actions if needed. - Supports other departments (AG, QA, Engineer and etc.) for production related activities such as safety audit, manufacturing trials for new product development, quality audit, energy saving projects, investigate the root cause of consumer complaints and etc, - Ensure constant dialogue with relevant stakeholders (line shift teams, Production Manager, Maintenance, Unions, functional representatives on the line)./p

Thông tin chung * Thời gian làm việc: Làm ca ngày và ca đêm * Không yêu cầu Tiếng Anh * Không yêu cầu kinh nghiệm * Độ tuổi: 22-25 * Ứng viên Nam đang sinh sống tại Hưng Yên : • Chịu trách nhiệm sửa chữa, bảo trì, bảo dưỡng, máy móc, thiết bị sản xuất. • Chuẩn bị tài liệu kĩ thuật, cho dây chuyền mới, sản phẩm mới. • Hàng này theo dõi hỗ trợ, xử lý sự cố phát sinh liên quan đến chất lượng, an toàn, hiệu suất cho dây chuyền sản xuất. • Thực hiện cải tiến, làm báo cáo sự cố • Các công việc khác được cấp trên phân công.

ob Description: Create and modify PCB designs and detailed CAD drawings with keen attention to DFM/DFA/DFT requirements. Contribute as an individual and collaborate closely with RF Design Engineers, Mechanical Engineers, and Test Development Engineers to create designs from concept through manufacturing and test. This role requires deep expertise in Cadence PLM systems, component creation, and library management to ensure design integrity and efficient product lifecycle management.   Key Roles & Responsibilities: - Work closely with cross-functional teams, including mechanical and hardware engineers and manufacturing specialists, from concept to schematic, layout, and assembly. - Host design reviews with all stakeholders. - Create or update fabrication and product assembly drawings using Cadence Allegro. - Generate ECOs (Engineering Change Orders) to release completed drawings and BOMs. - Implement changes to existing documentation based on input from engineering and manufacturing teams. - Manage and maintain component libraries within Cadence PLM, ensuring accuracy, completeness, and compliance with design standards. - Create new components and symbols in Cadence Allegro, ensuring proper electrical and mechanical attributes. - Collaborate with engineering teams to define and implement library management processes and best practices. - Ensure version control and traceability of components and design data throughout the product lifecycle. - Troubleshoot and resolve library-related issues and support continuous improvement of PLM workflows.

• Maintenance and repair of machines and robots in the factory• Mechanical design to upgrade and improve current machines in the factory to be more efficient (increase machine speed, reduce energy consumption ...)• Read and understand the current machine program – PLC to improve the program• Design of electrical control systems for automated machines• Installation and electrical connection for new machines – imported from abroad.• Applying AI to optimize repair work and improve machinery.

• Điều tra và phân tích thận trọng các khiếu nại từ khách hàng và khiếu nại nội bộ trong nhà máy và chuẩn bị báo cáo 8D; • Thực hiện theo và thẩm tra lại hiệu lực của việc thực hiện biện pháp đối phó;• Lập ra/xem xét các tiêu chuẩn kiểm tra, kết quả kiểm tra chất lượng và mẫu sản phẩm cho sản phẩm mới và các sản phẩm đang hiện hành;• Lập ra các tài liệu chất lượng như là mẫu tiêu chuẩn kiểm tra liên quan đến việc loại bỏ;• Kiểm soát tất cả các khiếu nại, yêu cầu và thẩm tra của khách hàng;• Làm sơ đồ và tiêu chuẩn làm việc cho máy móc;• Lên kế hoạch để kiểm soát cho mỗi sản phẩm;• Phân tích rủi ro tiềm ẩn của từng công đoạn có thể xảy ra lỗi và đưa ra các biện pháp khắc phục.

We are NIKKISO VIETNAM, INC, a 100% Japanese Invested Manufacturing Company. Our Factory is located in Thang Long Industrial Park II, Nguyen Van Linh Commune, Hung Yen Province. Our products are airplane components manufactured with specialized technology.We are welcome the potential candidate for filling the position of Quality Control Staff.Job description.- Manage product and material nonconformity processes, including disposition and documentation.- Collaborate cross-functionally with departments to investigate root causes of quality issues and implement corrective and preventive actions.- Prepare First Article Inspection (FAI) reports to ensure initial product compliance with customer requirements and validate manufacturing process capability.- Review Operation record and work instructions to eliminate discrepancies between documentation and actual operations.- Communicate with customers regarding quality issues and corrective actions.- Handle customer complaints and develop effective countermeasures to address and prevent recurrence.- Coordinate and support customer audits, ensuring timely preparation and effective responses.- Participate in continuous improvement initiatives focused on enhancing product and process quality.- Perform additional tasks as assigned by supervisors.

About Praxis AutomationPraxis Automation Technology B.V. (Netherlands) is a global leader in ship automation, navigation, and electric propulsion systems. With more than 7,000 vessels equipped worldwide, Praxis delivers integrated bridge, engine-room, and power-management solutions to both commercial and naval customers. Our new production and engineering site in Haiphong, Vietnam, supports the design and manufacturing of advanced marine-automation systems as part of our international growth strategy.Role OverviewWe are looking for a 3D CAD Designer to join our engineering team in Haiphong. You will create and manage detailed 3D models and production drawings for marine automation and electric propulsion products developed under the Praxis Mega-Guard product line.Responsibilities• Develop 3D CAD models and assemblies for control cabinets, consoles, mechanical supports, and marine electrical systems.• Generate accurate 2D manufacturing drawings, BOMs, and exploded views.• Work closely with mechanical, electrical, and system engineers to ensure manufacturability and serviceability.• Apply marine standards and internal Praxis design guidelines throughout your work.• Support production with technical documentation and continuous design improvements.What We OfferWe offer a good salary, commuting allowance, business trip allowance, 18 days of annual leave, annual health check, good secondary work conditions, and a possibility of studying abroad to get more acquainted with the applicable technologies and equipment. We expect an active input and offer an informal, friendly work environment.

We are NIKKISO VIETNAM, INC, a 100% Japanese Invested Manufacturing Company. Our Factory is located in Thang Long Industrial Park II, Nguyen Van Linh Commune, Hung Yen Province. Our products are airplane components manufactured with specialized technology.We are welcome the potential candidate for filling the position of Quality Control Staff.Job description.- Manage product and material nonconformity processes, including disposition and documentation.- Collaborate cross-functionally with departments to investigate root causes of quality issues and implement corrective and preventive actions.- Prepare First Article Inspection (FAI) reports to ensure initial product compliance with customer requirements and validate manufacturing process capability.- Review Operation record and work instructions to eliminate discrepancies between documentation and actual operations.- Communicate with customers regarding quality issues and corrective actions.- Handle customer complaints and develop effective countermeasures to address and prevent recurrence.- Coordinate and support customer audits, ensuring timely preparation and effective responses.- Participate in continuous improvement initiatives focused on enhancing product and process quality.- Perform additional tasks as assigned by supervisors.

• Maintenance and repair of machines and robots in the factory• Mechanical design to upgrade and improve current machines in the factory to be more efficient (increase machine speed, reduce energy consumption ...)• Read and understand the current machine program – PLC to improve the program• Design of electrical control systems for automated machines• Installation and electrical connection for new machines – imported from abroad.• Applying AI to optimize repair work and improve machinery.

Position Objective:• Achieve all Department specific targets (Policy deployment and OPI).• Support maintenance technician for advance technique.• Support continuous improvement for quality, productivity, safety, machine breakdown.• Support APS implementation.• Support Q5 activities• Support 8D activity and “YOKOTEN” on time• Support AS procedure and implementation• Maintain and support IATF16949, ISO 9000 / ISO14001Position Scope• Report to the Maintenance Section Manager• Follow and promote all ALV/ VNQN policies and procedures.• Support continuous improvement.• Support internal Maintenance department and MC activities.• Supervision of all AMC Maintenance activities in the AMC and Facility Functional• Support to New line commissioning with IE departmentTasks/ Responsibilities: (Main Activities)• Responsible for Maintenance supervision• Working with MC Maintenance for up time of AMC (Autonomous Manufacturing Center) production equipment• Working with AMC Maintenance for evaluate machine improvement action.• Working with AMC Maintenance for improve machine process capability.• Responsible for achieving policy deployment targets (Both Maintenance department and AMC)• Through continuous follow up ensure that policy deployment targets are achieved.• Responsible for standardized methods of working / planning within the AMC.• Support APS implementation, active participation in APS workshop activity, specifically TPM deployment.• Responsible for review efficiency & effectiveness of PM & PD• Responsible to utilize L2L to support maintenance activities to improve machine downtime.• Responsible for AMC machine competence and training.• Responsible for machine tool 5S.• Cooperate with Spare controller to ensure sufficient spare part inventory for AMC Maintenance.• Support to fixed asset list of equipment within the AMC.• Responsible to ensure machine safety.• Support new production line commissioning, setup and tuning.• Responsible for preparation necessary document such PM check sheet.

• Điều tra và phân tích thận trọng các khiếu nại từ khách hàng và khiếu nại nội bộ trong nhà máy và chuẩn bị báo cáo 8D; • Thực hiện theo và thẩm tra lại hiệu lực của việc thực hiện biện pháp đối phó;• Lập ra/xem xét các tiêu chuẩn kiểm tra, kết quả kiểm tra chất lượng và mẫu sản phẩm cho sản phẩm mới và các sản phẩm đang hiện hành;• Lập ra các tài liệu chất lượng như là mẫu tiêu chuẩn kiểm tra liên quan đến việc loại bỏ;• Kiểm soát tất cả các khiếu nại, yêu cầu và thẩm tra của khách hàng;• Làm sơ đồ và tiêu chuẩn làm việc cho máy móc;• Lên kế hoạch để kiểm soát cho mỗi sản phẩm;• Phân tích rủi ro tiềm ẩn của từng công đoạn có thể xảy ra lỗi và đưa ra các biện pháp khắc phục.

Role and responsibilitiesResponsibilities of this position are the commercial and customer aspects management of assignedprojects, including:• Full-cycle Project execution from contract award until final acceptance.• Participate in the project proposal phase with sales/proposal team to review customers’ specificationsand leading DFM review and discussion• Defining project plan documents in relation to scope, budget, schedule and risk management.• Monitoring project implementation to ensure best practices in terms of costs, resource efficiency,risk management and Health, Safety & Environment (HSE)• Building and maintaining strong relationships with stakeholders, effectively communicatingwith them, and acting as the key contact for the customer• Leading technical team and organizing right resource to solve issues for NPI project during differentverification build test, such as EVT, PVT until to mass production• Managing the project according to agreed requirements, ensuring that all targets are met, andthat relevant guidelines are followed• Monitoring and controlling project financials, overseeing project invoicing status, costs, expenses,and cash flow• Driving the formal acceptance of the project, contract close-out and acknowledgement by thecustomer• Build and maintain ABB/Customer relationship / Ensure Customer satisfaction• Ensure quality/continuous performance• Control project documentation, ECN and COR management.• Seeking more commercial opportunities during project execution

● Position Manager will be offered base on candidates experience and capability● The Packaging Solution Department Manager leads the design, development, and optimization of packaging systems for automotive components and assemblies. This role ensures packaging meets durability, safety, cost, and sustainability standards while supporting efficient logistics.● Develop packaging strategies for inbound parts, outbound shipments, and aftermarket components. ● Align packaging solutions with lean manufacturing, JIT delivery, and global supply chain requirements. ● Design and validate packaging for complex automotive parts (e.g., engines, electronics, body panels). ● Implement reusable and returnable packaging systems to reduce waste and cost. ● Ensure packaging meets automotive standards and regulatory requirements ● Conduct packaging audits and root cause analysis for damage or inefficiencies. ● Manage a team of packaging engineers and technicians across multiple sites or programs. ● Provide training on packaging protocols, safety, and continuous improvement. ● Collaborate with suppliers, 3PLs, EDC, Shops to ensure packaging compatibility and performance. ● Oversee packaging procurement, cost negotiations, and vendor performance. ● Drive initiatives for lightweight materials, recyclability, and carbon footprint reduction ● Monitor packaging spend and identify cost-saving opportunities through design and process improvements.